SOLVING HARDWARE INSTALLATION PROBLEMS.

You may need to reconfigure the computer when you add or remove hardware, such as an additional diskette drive. If you install a plug and play device, you must reconfigure the computer after completing installation of the new hardware. In window 95 and window 9, select the add new hardware icon in the control panel add follow the instruction that appears on the screen. To reconfigure the computer in Windows NT 4.0 after installing new hardware, use the utility provided with the hardware.

PROPLEMS CAUSE SOLUTION

A new device is not recognized as part of the computer system	The computer needs to be reconfigured to recognize the device.	Follow the reconfiguration instruction above.
	Cable(s) of new external device are loose or power cables are unplugged.	Ensure that all cables are properly and securely connected and that pins in the cable or connector are not bent down.
	Power switch of new external device is not turned on.	Turn off the computer, turn on the external device, then turn on the computer to integrate the device with the computer system.

Posted in: PC REPAIR